Your hot water has gone cold – but should you call a plumber or an electrician? You don’t want to pay for one to turn up if you really need the other, so how can you make an informed decision? Here are a couple of tips to help you decide.
(If you’re still Not sure, give us a call on 6331 4711 and we’ll help you sort it out).
Is there water at the tap?
If there is plenty of cold or lukewarm water coming out of the hot taps you probably need an electrician.
If there is no water, or a reduced amount of water coming out of the tap, you probably need a plumber.
Has the fuse blown?
Has the circuit breaker tripped or fuse blown? If so, you probably need an electrician, unless there are signs of water leaking around the cylinder in which case you probably need a plumber.
Any sign of of leaks?
Check for signs of water around the base of the cylinder and for signs of rust on the external casing of the cylinder. A leaking cylinder usually has to be replaced. There is no way to repair a rusted mains pressure cylinder.
Sometimes the cylinder can leak around the element, making the area rusty.
Water leaking around the element can also affect the electrical connections, causing a blown fuse or tripped circuit breaker. Sometimes replacing the element can solve the problem but corrosion from a loose element can destroy an otherwise good cylinder.
A regular check for water leaks is a good idea.
Check the pressure relief valve
There will be a pipe running from the pressure relief valve on the side of the cylinder to an outside drain. Check the amount of water running out of this pipe. A correctly operating valve will only let out a small amount of water. Probably less than a cup each day.
If there is water constantly running out the pipe you have a problem with the pressure relief valve. There is a lever on top of the valve that you can lift to let water out through the valve. Sometimes lifting the lever will reset the valve and solve the problem.
If the valve is faulty it needs to be replaced by a plumber – unless the problem is caused by a stuck thermostat, in which case you need an electrician.
A faulty thermostat can keep the water heating until it’s almost boiling. The pressure inside the cylinder builds up until the pressure relief valve does it’s job and lets some water out.
Replacing your cylinder
If your cylinder does need replacing, most of the work is plumbing work and some plumbers are authorised to disconnect and reconnect the wiring when replacing a cylinder. However, it’s wise to have an electrician attend if the cylinder does need to be replaced, especially if you are going from a low pressure to mains pressure unit.
Most plumbers are pretty good, but they are not electricians and new cylinders are sometimes reconnected to old wiring which is too small to safely handle the load of the element in the new cylinder. Fire, electric shock, insurance problems, warranty problems and running out of hot water are all possible in such circumstances.
All new hot water cylinders are physically larger than the older models as they are now required to have more insulation around them. This can cause problems if your cylinder is presently located in a laundry cupboard for example. Your new cylinder may have to be moved outside and that is definitely a job for both a plumber and an electrician.
Having hot water problems? Got a question?
Give us a call and we’ll help you out with free advice over the phone.
Need An Electrician In A Hurry? Your hot water problem can be fixed today…
Phone 6331 4711 email admin@manceelectrical.com.au
